Universal Media Gateway

Telsol SARVAM UMG is a Universal Connectivity Media Gateway offering connectivity to VOIP, GSM/3G/4G, T1/E1 PRI, and POTS networks on a single platform. It allows users to make and receive calls transparently on all networks. It supports flexible and intelligent Least Cost Routing (LCR), leading to significant cost savings and round-the-clock connectivity. It allows enterprises to dynamically select one of the networks on a per-call basis for benefits of improved reach, reduced cost and enhanced quality of service. Telsol SARVAM UMG links an organization’s existing infrastructure to the new age communication networks ensuring right connectivity and least cost for each and every call. The gateway is an ideal solution for workplaces such as call centers, ISP, ITSP, wholesale terminators and organizations experiencing high call traffic on a per day basis.

Telsol SARVAM UMG - the High Density Universal Media Gateway offers integrated interfaces for multiple network connectivity on a single platform. It can be used with PBX of any brand or even in standalone mode. The Gateway works as an adjunct to existing telephony infrastructure, with no need to replace any existing equipment. This not only saves additional investment on acquiring new equipment, but also saves time and efforts required for reinstallation of the system and retraining users. When connected with any existing PBX, the Universal Media Gateway remains completely transparent to all users and allows them to make and receive calls, and use the same PBX features.

Universal routing combined with least cost routing and telephony costs can be significantly reduced by selecting the most economical network for call routing based on number, time, network, port and combinations of each. The universal slot architecture allows selection and configuration of interface options to match the exact call traffic requirements of an organization.

KEY FEATURES

  • Completely Flexible Solution with Universal Design Architecture
  • Any-to-any Network Call Routing
  • Time, Number, Service Provider based least Cost Routing
  • Call Budgeting based on Allocated Amount, Minutes and Call Count
  • Open Standard SIP Support
  • Penta-band GSM and 4G band Network Operation
  • Health Monitoring using SNMP
  • Secured Communication over TLS and SRTP
  • Network and BTS Locking
  • Distributed Processing Architecture, Localizing Fault Points and Minimizing Downtime
  • Flexible Mounting Options – Wall, Table Top and 19” Rack

KEY FEATURES

Universal Network Connectivity for Office Phone Systems
  • VOIP, GSM/3G/4G, TI/E1 and POTS - Universal Network Connectivity in a Single Platform
  • Seamless Integration with Existing Telephony Infrastructure
  • Any-to-any Network Call Routing
  • 100% Non-blocking Architecture
  • Efficient least Cost Routing
  • Industry Standard Network Protocols and Signalling Support
Universal Media Gateway

TECHNICAL SPECIFICATIONS

SYSTEM CAPACITY:
Expansion Slots 12
Expansion Cards 64 VOIP Channels per Module (Max. 2 Modules)
4 GSM/3G/4G SIM per Interface Card
23/30 Digital (T1/E1 PRI) Channels per Interface Card
8/16 FXO Ports per Interface Card
8/16/20 FXS Ports per Interface Card
VOIP PORT:
Protocol SIP v2
Physical Connector Ethernet (RJ45)
Voice Quality G.168 Echo Cancellation, Layer3 QoS and DiffServ and CNG
Voice Codecs G.711 (A-law, μ-Law), G.723, G.729AB, GSM-FR, GSM-EFR and iLBC Voice Codec
SIP Trunks 120
MOBILE PORT:
Frequency Bands 2G: GSM 850, EGSM900, DCS1800, PCS1900, UMTS 850/900/1900/2100
3G: GSM 850, EGSM900, DCS1800, PCS1900, UMTS 850/900/1900/2100
4G: For EMEA Region - LTE FDD: B1/B3/B5/B7/B8/B20
LTE TDD: B38/B40/B41
WCDMA: B1/B5/B8
GSM: B3/B8
For North America - LTE FDD: B2/B4/B12/B13
WCDMA: B2/B4/B5
For Australia - LTE FDD: B1/B3/B5/B7/B28
WCDMA: B1/B5
Compliance ETSI GSM Phase2/2+
SIM Interface 1.8, 3V SIM Interface
Antenna Panel Mount or Extended Cable Antenna
1.8/3.0 dBi, 50 Ω SMA (Male) Connector
T1/E1/PRI:
Channels 2B+D
Physical Connector RJ48 (120Ω)
Personality Network (NT) and Terminal (TE)
Switch Variants AT&T 4ESS, AT&T 5ESS, DMS-100, ETSI NET5, ITU-T Q.921, ITU-T Q.931, NTT INS64, US NI2 (National ISDN 2), QSIG ECMA and France VN Signaling
Framing ESF for T1 and CEPT1 (with/without CRC) for E1
FXO PORT:
Physical Connector RJ11
Dialing DTMF and Pulse (10/20PPS)
Loop Limit 1200W
CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI
FXS PORT:
Physical Connector RJ11
Dialing DTMF and Pulse (10/20PPS)
CLI Presentation DTMF, FSK ITU-T V.23 and FSK Bellcore 202A CLI
Call Maturity Polarity Reversal
POWER SUPPLY:
Input Option 1 (Mains): 100-240 VAC, 47-60 Hz
Option 2 (DC): 48VDC +20% to -15%
Power Consumption 170W (Typical)
MECHANICAL:
Dimensions (WxHxD) 43.65x22.6x17.35cm (17.18"x8.9"x6.83")
Unit Weight 5 kg (11.02lbs)
Shipping Weight 8 kg (17.63lbs)
Mounting Options Wall Mount, Table Top and 19” Rack Mount with 4U Enclosure
ENVIRONMENTAL:
Operating Temperature 0⁰C to +45⁰C (32⁰F to113⁰F)
Storage Temperature -20⁰C to +70⁰C
Operating Humidity 5-95% RH (Non-condensing)
Storage Humidity 0-95% RH (Non-condensing) at 40°C
REGULATORY COMPLIANCES:
  IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 60950-1, IEC 6000 68-2-6:2007, IEC 68-2-27, IS:9000, TEC, RoHS, FCC Part15 and FCC68, CE

SYSTEM SCALABILITY

SYSTEM RESOURCES DESCRIPTION SARVAM UMG (ETERNITY GENX) Max. Resources
Universal Slots For Interface Expansion Cards (except VOIP and VMS) 12
SIP Trunks SIP Trunks (Clients) for ITSP or Peer-to-Peer 120
VOIP Channels VOIP Channels for Simultaneous Calling with Transcoding 128
NX DBM VOCODER64 DAUGTHER-BOARD MODULE on CPU for VOCODER (VOIP) Channels 2
GSM/3G/4G Ports GSM/3G/4G Network 48
T1/E1 PRI Ports T1 or E1 or ISDN PRI Network or Compatible Device 8
CO/FXO (TWT) Ports Two Wire Trunk (CO) Lines 120
SLT/FXS Ports Single Line Analog Telephones 120
Max Concurrent IP-TDM Calls IP-TDM Audio Calls 128